Reply to Thread
Results 1 to 6 of 6

Thread: I Got No Wood ... so to speak

  1. #1
    Recruit
    Join Date
    Jan 2012
    Posts
    21

    I Got No Wood ... so to speak

    Level 19.

    I have ten (!) fir-wood cutters -- all with Forester support and all near storage houses. Buffing them constantly.

    Eight Coking plants going, two upgraded, to keep up with coal. One Bowmaker.

    Always low on fir wood.

    Advice?
    Last edited by Trunk; 01-25-12 at 01:26 am.

  2. #2
    Settler
    Join Date
    Jan 2012
    Posts
    131
    World
    Zeus
    Are they all upgraded? That will make a big difference. Makes sense you need a lot of wood - with those coking plants you're using about 20 firwood every 3 and a half minutes!!

  3. #3
    Recruit
    Join Date
    Jan 2012
    Posts
    1
    Put Foresters next to the cutters.

  4. #4
    Settler
    Join Date
    Oct 2011
    Posts
    145
    World
    Zeus
    Upgrading the foresters and cutters is your best answer. I have about 10 cutters and 15 foresters (too lazy to actually count) and they're all level 3. I have 6 level 3 coking plants, 1 level 3 bowmaker, and 1 level 3 plank maker. Without getting it down to a science you basically need one level of cutter for each level of coking/bow/plank and you need 1.5 levels of forester for each level of cutter.

    Obviously that's a general statement but it's a good estimate.

  5. #5
    Noble Bobj's Avatar
    Join Date
    Nov 2011
    Posts
    457
    Another option is to just buy bows on the market- it is cheaper that way since people don't need bows after a certain point and still get tons from rewards, so they dump them cheaply for coins or w/e.

    Signature by emahs2! ........ Looking for an adventure? Start your search here! ....Also Buying eggs!

  6. #6
    Recruit
    Join Date
    Jan 2012
    Posts
    3
    World
    Zeus
    forresters next to trees...then the storeehouse THEN the cutters...if you have the ccutters closer to the trees your forresters cant keep up since they take longer. also its 3 forresters to every 2 cutters. i never have any stumps with this method

Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts